Chat with Sunniva on WhatsApp
Skip to Content

Products › Sunniva Home All-in-One › 300 L

Sunniva Home · All-in-One · SE-HA-300

Sunniva Home All-in-One 300

Heat pump and a 300 L enamel-lined tank in one cabinet: one unit to place, two pipes to connect. Best for a family of 5–6. Hot water up to 60 °C on the heat pump, 75 °C with the backup heater, and Wi-Fi control from your phone.

MRP

₹1,59,900

Includes 18% GST and delivery to any pin code. ₹1,35,508 basic + ₹24,392 GST; business buyers claim the GST back.

Datasheet (PDF)

Pre-order online or on WhatsApp now. Deliveries start in early 2027, and you can cancel free any time before dispatch.

One price for everyoneInstallation from ₹3,0005-yr tank · 5-yr compressor · 3-yr full warranty
Sunniva Home All-in-One 300 heat pump water heater
Tank300 L
Heating capacity2.65 kW
Power input552 W
Max water temp.75 °C
Noise≤ 48 dB(A)
Wi-FiSmart Life app

Choose the size

Allow about 40–60 litres of hot water per person per day. Not sure? Tell us your family size and bathrooms on WhatsApp.

Specifications

Tank capacity300 L
Heating capacity (heat pump)2.65 kW
Rated power input (heat pump)552 W
With backup heater4.65 kW · 2,552 W · 14 A
Hot water55 °C rated, up to 60 °C on the heat pump, 75 °C with backup heater
Outdoor air range−7 °C to 43 °C
Refrigerant / compressorR134a, 950 g · Panasonic rotary
Noise≤ 48 dB(A)
Size, net weightØ640×2,000 mm, 125 kg
Water connectionsDN20
Heat exchangerMicro-channel coil wrapped outside the enamel-lined steel tank
Power supply220–240 V / 50 Hz / 1 ph, Class I, IPX4 (outdoor-rated)
Basic price₹1,35,508
GST (18%), claimable for business use₹24,392
Price incl. GST and delivery₹1,59,900

Specifications may change without notice.

Functions, features and benefits

Three operating modes

Standard runs on the heat pump alone. Hybrid adds the backup heater for the fastest recovery. Electric mode is a standby option.

Lowest bills day to day, extra speed when guests arrive
Back to economy in 24 hours

If someone leaves Hybrid or Electric mode on, the unit returns to Standard by itself after 24 hours.

A forgotten setting can’t quietly push up your bill
Phone control over Wi-Fi

Pair with the Smart Life app: switch on or off, set the temperature, change mode, set timers and see fault alerts from anywhere.

Hot water ready when you get home, and warnings before a cold shower
Timers, clock and key lock

Set switch-on and switch-off times on the unit or in the app. Hold one button for 3 seconds to lock every key.

Heat in off-peak hours, safe from curious children
Two tank sensors

Sensors in the top and middle of the tank. It heats only when the stored water has cooled, not every time a tap runs.

Fewer starts, longer compressor life, steadier temperature
DC fan and electronic expansion valve

The fan speed and refrigerant flow are adjusted continuously to the conditions.

Quieter, more efficient running across seasons
Up to 75 °C for hygiene

The heat pump gives up to 60 °C; the backup heater can take the tank to 75 °C.

An occasional high-temperature cycle keeps stored water hygienic
Defrost, frost and self-protection

Automatic defrost, anti-freeze protection on standby, and a self-check that restarts the unit once a problem clears.

Runs through winter and power fluctuations without a service call
Safety valve and anode included

Pressure and temperature relief valve, magnesium anode and a 0.8 MPa enamel-lined tank.

Safe on mains or pump pressure, with a tank built to last

Connect to Wi-Fi in two minutes

  1. Get the app. Install Smart Life or Tuya Smart from the Play Store or App Store and create an account.
  2. Prepare your phone. Connect it to your home Wi-Fi on the 2.4 GHz band (5 GHz is not supported) and turn on Bluetooth.
  3. Start pairing on the unit. With the unit powered on, press and hold ▲ and M together for 3 seconds. The Wi-Fi icon starts flashing.
  4. Add it in the app. Tap +, then Add Device. The app finds the heat pump by itself: tap it, then Done.
  5. If it times out. Pairing stays open for 3 minutes. If the icon stops flashing, hold ▲ and M for 3 seconds again.

How it works

How a Sunniva all-in-one heat pump heats water It moves free heat from the surrounding air into the tank, using roughly a quarter of the electricity an electric geyser needs. 1 Air in The fan pulls in surrounding air. Even at −7 °C it still holds useful heat. 2 Evaporator Cold liquid refrigerant in the finned coil soaks up that heat and boils into a vapour. Hot water out Drawn from the top of the tank, up to 60 °C on the heat pump alone. Electric backup heater Takes the water to 75 °C when needed, or covers very cold days. Cold water in Mains water enters at the bottom and stays separate from the hot layer. 3 Compressor Squeezes the vapour, raising its pressure and temperature sharply. Cool, dry air out The air leaves a few degrees colder, a free bonus in kitchens and utility rooms. 4 Condenser coil The hot gas runs through a micro-channel coil wrapped around the outside of the tank and heats the water through the wall. 5 Back to liquid Having given up its heat, the refrigerant condenses to a liquid at the bottom of the coil. 6 Expansion valve The liquid's pressure drops, it turns cold again and returns to the evaporator to repeat the cycle. 1 2 3 4 5 6 Hot refrigerant gas Liquid refrigerant Low-pressure vapour Sealed R134a loop outside a glass-lined, insulated steel cylinder: the refrigerant never touches the water.
  1. Air in. The fan pulls in surrounding air, which holds useful heat even at −7 °C.
  2. Evaporator. Cold liquid refrigerant soaks up that heat and boils into a vapour.
  3. Compressor. The vapour is compressed, so its pressure and temperature rise sharply.
  4. Condenser coil. The hot gas runs through a micro-channel coil wrapped around the outside of the tank and heats the water through the wall.
  5. Back to liquid. Having given up its heat, the refrigerant condenses to a liquid.
  6. Expansion valve. The pressure drops, the liquid turns cold again and goes back to the evaporator.

Installation

A fixed charge by city, the same for every model. Installed by Sunniva or an authorised partner.

Metro cities₹3,000Mumbai, Thane, Pune, Delhi, Bengaluru, Hyderabad, Chennai, Kolkata, Ahmedabad
Tier 2 cities₹5,000About 90 cities, such as Jaipur, Lucknow, Surat, Nagpur, Nashik, Kochi, Indore, Coimbatore, Gurugram, Noida
Rest of India₹6,000Every other pin code

One fixed charge per unit for standard installation, the same for every model. City tiers follow the Government of India city classification. Extras listed below are quoted separately.

Sunniva Home All-in-One: site installation schematicIndicative hookup. Confirm the final scheme against the installation manual and local plumbing code.Outdoors or a ventilated utility area, on a level floorAll-in-one unit, 200 / 300 L1Air inCool air out234Taps5678Mains9to floor drain10MCB+ earth111Keep air inlet and outlet clear; never in a closed room2Cooled air leaves the unit; do not duct it indoors3Condensate drain to a drain point4Isolation valve on the hot outlet5Isolation valve on the mains feed6Y-strainer7Pressure-reducing valve if mains exceeds the tank rating8Non-return valve9Safety valve (supplied); pipe to a drain, never cap it10Drain valve at the base11Dedicated MCB and earthing, unit and backup heater

Standard installation includes

  • Placing the unit on a level floor, outdoors or in a ventilated utility area
  • Hot and cold connections to your existing plumbing within 2 m
  • Safety valve, condensate and drain piped
  • Commissioning and a demonstration

Quoted separately

A plinth, a new MCB or cable run, longer pipe runs and removing an old geyser are quoted separately.

Looking after it

  • Every 6 months: Check the magnesium anode and replace it when used up; clean the tank and the backup heater
  • Every year: Operate the safety valve lever to check water flows freely
  • Before a long break: Switch off, drain the tank in freezing areas, and close the valves

Warranty

  • 5 years on the enamel-lined tank
  • 5 years on the compressor
  • 3 years on the whole unit, parts and labour

Register online within 30 days. Installed by Sunniva or an authorised partner, used within the water-quality limits, and the magnesium anode checked every 6 months.

Buying for a business?

Send your GSTIN with your order and we issue a GST invoice in your company name, so you can claim the ₹24,392 GST as input tax credit. Depreciation on the basic price may also apply; your CA confirms eligibility and the rate.

Every Sunniva Home heat pump has one price, the same in every city, for one unit or fifty. See our terms of sale, cancellation and refunds and shipping and installation.

Considering the split instead?

Short of floor space outdoors, or want the tank indoors?

See Sunniva Home Split →

Common questions

Does it work in winter?

Yes, down to −7 °C outside air, with a 2 kW backup heater for the coldest days.

How much will I save?

About 4 units of heat for every unit of electricity, so up to 75% less power than an electric geyser for the same hot water. Actual savings depend on use, tariff and climate.

Who installs it in my city?

Our own team in our strongest cities, authorised partners elsewhere. Installation is ₹3,000 in metro cities, ₹5,000 in tier 2 cities and ₹6,000 everywhere else; check your pin code in the Installation section.

Where can the all-in-one go?

Outdoors (it is rated IPX4) or in a well-ventilated utility area, garage or terrace room. It needs free air at the inlet and outlet; never install it in a closed room.

Does it cool the room?

Yes, slightly. It takes heat from the air, so the air leaving it is cooler and drier, a small bonus in a kitchen or utility area.

Sunniva Home All-in-One 300

MRP ₹1,59,900, GST and delivery included.